Loom routing to hour meter, Hour meter connection, Assembly instructions – Land Pride ZT60 User Manual

Page 7

Advertising
background image

7

7/18/08

Manual No. 357-178M

Assembly Instructions

Land Pride

Loom Routing To Hour Meter

Refer to Figure 18:
1.

Remove the two Phillip head screws (#1) securing
console panel.

2.

Lift console panel up and locate hole in bottom of
console cavity.

3.

Route end “C” of hour meter loom along right side of
the mower frame and up through hole in bottom of
console cavity.

Console Panel

Figure 18

Refer to Figure 19 & Figure 20:
4.

Pull excess loom inside of cavity (Figure 19) and
plastic tie hour meter loom to main loom inside of
cavity (Figure 20). See Important note below.

Hour Meter Connection

Refer to Figure 21:
1.

Pull gray wire female terminal from hour meter.
Locate gray wire female terminal on end “C” of the
plastic loom and attach it to the hour meter terminal.

2.

Pull black wire female terminal from hour meter.
Locate black wire female terminal on end “C” of the
plastic loom and attach it to the hour meter terminal.

3.

Connect the pulled gray and black female terminals
to the male terminals on end “C” of the plastic loom.
Be sure to attach gray to gray and black to black.

4.

Replace console panel and tighten screws.

Hour Meter

Blade
Engagement

Ignition
Switch

1

1

Choke Knob

24961

Throttle Lever

IMPORTANT: Do not tie loom to throttle cable or
choke cable. Tying to either will limit their operation.

Hour Meter Loom Placement

Figure 19

Hour Meter Loom Tie Location

Figure 20

Headlight Loom Placement

Figure 21

Hour Meter
Loom

Hole in
Console Cavity

Female Terminal
on Gray Wire
Connects to Hour
Meter

Female Terminal
on Black Wire
Connects to Hour
Meter

Male Terminal
on Gray Wire

Male Terminal
on Black Wire

24962

Plastic Tie

(Do Not Attach

To Choke or

Throttle Cables)

Throttle Cable

Main Loom

Hour Meter Loom

Choke Cable

24963

Female Terminal On Gray Wire
Connects To Positive (+)
Terminal On Hour Meter

Female Terminal On Black
Wire Connects To Negative (-)
Terminal On Hour Meter

Male Terminal On Black Wire
Connects To Black Wire
Pulled From Hour Meter

Male Terminal On Gray Wire
Connects To Gray Wire
Pulled From Hour Meter

Hour Meter Loom

24964

Advertising