Land Pride AT2672 - Manual (Page 11)

9
Section 1: Assembly and Set-Up
AT2672 Grooming Mowers 310-302M
Land Pride
07/02/07
Table of Contents
Optional Equipment
Front Anti-Scalp Roller Assembly
Refer to Figure 1-2:
1. Assemble right hand bracket (#6) and left hand
bracket (#4) with carriage bolts (#1) and flange nuts
(#2).
2. Align roller (#5) with holes in brackets and insert pin
(#3). Secure with flat washer (#7) and cotter pin (#8)
.
Front Anti-Scalp Roller
Figure 1-2
Tractor Hook-Up
1. Be certain that tractor drawbar will not interfere.
Move drawbar ahead or remove if required. Drawbar
should also be checked for clearance when unit is
being raised for the first time.
2. Align lower link arms of tractor to hitch clevises on
mower. Insert lower hitch pins into lower ball swivels
and attach linch pins.
3. Attach tractor top link to upper floating hitch on
mower with pin supplied. Secure with lock pin.
4. Adjust the tractor top link in or out to place the upper
hitch pin vertically above the lower hitch pins as
shown in Figure 1-3, to allow mower flotation.
Tractor Hook-Up
Figure 1-3
18882
20546