Safety labels, Table of contents safety labels, 130c – Land Pride AT2672 User Manual
Page 6: 230c, 540c
4
Important Safety Information
AT2672 Grooming Mowers 310-302M
Land Pride
07/02/07
Safety Labels
Your mower comes equipped with all safety labels in place.
They were designed to help you safely operate your implement.
1. Read and follow label directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels.
4. Some new equipment installed during repair require safety
labels to be affixed to the replaced component as specified
by Land Pride. When ordering new components make sure
the correct safety labels are included in the request. To
order new labels go to your Land Pride dealer.
1.
Refer to this section for proper label placement.
To install new labels:
a.
Clean the area the label is to be placed.
b.
Spray soapy water on the surface where the label is to
be placed.
c.
Peel backing from label. Press firmly onto the surface.
d.
Squeeze out air bubbles with the edge of a credit card.
818-130C
Caution: 540 RPM
818-230C
Red Reflector (Both Sides)
818-540C
Danger: Guard Missing
13314
18752
18754