La Crosse Technology WS-7016U - Manual

1
WS-7016U
Wireless 433 MHz
Temperature Station
Instruction Manual
2
TABLE OF CONTENTS
Topic Page
Inventory of Contents
1
Additional Equipment 1
Quick Setup 2
Detailed Setup Guide
Battery Installation 3-6
Remote Control Sender 3-4
Indoor Temperature Station 5-6
Setting the Time 7-8
Selecting Units of Measurement 8
Features
Indoor Minimum and Maximum
Temperatures
9
Outdoor Minimum and
Maximum Temperatures
10-11
Resetting the Indoor Minimum
and Maximum Temperatures
11-12
Resetting the Outdoor Minimum
and Maximum Temperatures 12
Reading the Temperature Trend 13
Mounting
3
Remote Control Sender 13-16
Indoor Temperature Station 16-18
Using Multiple Remote Control Senders
Setup of Multiple Units 18-21
Viewing Remote Control
Senders
21-22
Features of the Multiple Remote
Control Senders
22-23
Troubleshooting 24-28
Maintenance and Care Instructions 28-29
Specifications 29-31
Warranty Information 31-33
FCC DISCLAIMER 34
INVENTORY OF CONTENTS
1. The Indoor Temperature Station (Figure 1)
2. The Outdoor Remote Control Sensor
(TX3U) and mounting bracket. (Figure 2)
3. 3 each, 1/2” Philips screws.
4. One strip of double sided adhesive tape.
4
5. Instruction Manual and Warranty Card.
ADDITIONAL EQUIPMENT (not included)
1. 1 Philips screwdriver.
2. 1 Flat screwdriver.
3. 2 Fresh AA 1.5V batteries.
4. 2 Fresh AAA 1.5V batteries.
QUICK SETUP
1. Insert two AAA batteries into the Remote
Control Sender.
2. Insert two AA batteries into the Indoor
Temperature Station.
Figure 1
Figure 2