La Crosse Technology WS-7016U - Manual (Page 4)

13
B. OUTDOOR MINIMUM AND
MAXIMUM TEMPERATURES
1. Press and hold the OUTDOOR
button for 1 second. “MIN”
appears in the OUTDOOR LCD.
The “OUTDOOR MIN,” and
“TIME” displays will flash. The
recorded minimum temperature is
displayed in the OUTDOOR LCD,
and the time it was recorded is
displayed in the TIME LCD.
After 15 seconds the “OUTDOOR
MIN,” and “TIME” will stop
flashing. However, the minimum
outdoor temperature will continue
to be displayed.
2. Press and hold the OUTDOOR
button for 1 second. “MAX”
appears in the OUTDOOR LCD.
The “OUTDOOR MAX,” and
“TIME” displays will flash. The
recorded maximum temperature is
displayed in the OUTDOOR LCD,
14
and the time it was recorded is
displayed in the TIME LCD.
After 15 seconds the “OUTDOOR
MAX,” and “TIME” will stop
flashing, and the maximum
outdoor temperature will continue
to be displayed.
3. To return to current temperature,
press and hold the OUTDOOR
button for 1 second.
V. RESETTING THE MINIMUM AND
MAXIMUM TEMPERATURES
A. INDOOR
1. To reset both the minimum and
maximum temperatures—press
and continue to hold the INDOOR
button, while you press and hold
the RESET button. When the
temperatures are reset release the
buttons.
15
2. To return to the current indoor
temperature, press and hold the
INDOOR button two times,
holding for 1 second each.
B. OUTDOOR
1. To reset both the minimum and
maximum temperatures—press
and continue to hold the
OUTDOOR button, while you
press and hold the RESET button.
When the temperatures are reset
release the buttons.
2. To return to the current outdoor
temperature, press and hold the
OUTDOOR button two times,
holding for 1 second each.
VI. READING THE TEMPERATURE
TREND
A. The temperature trend indicator is
displayed in the OUTDOOR LCD.
16
1.  Indicates that the temperature
is rising.
2.  Indicates that the temperature
is dropping.
3. The absence of an arrow indicates
that the temperature is stable.
VII. MOUNTING
A. THE REMOTE CONTROL
SENDER
Note: To achieve a true temperature
reading, avoid mounting where direct
sunlight can reach the Remote Control
Sender. We recommend that you mount the
Sender on a North-facing wall. The sending
range is 80ft; obstacles such as walls,
concrete, and large metal objects can
reduce the range. Place both units in their
desired location before permanently
mounting the Remote Control Sender.
There should be a change of temperature in
the OUTDOOR LCD within 6 minutes.