LCD Digital DGP2-641 - Manual (Page 15)

LCD Keypad 15
8.0 ADDITIONAL FEATURES
8.1 PROGRAMMABLE OUTPUTS (PGMS)
Your system includes Programmable Outputs (PGMs) that can be programmed by your Installer. A PGM triggers
when a predetermined event or series of events occurs in your system. The PGMs can be programmed to reset
smoke alarms, turn on light switches, open or close garage doors and much more. Ask your Installer about this
useful feature.
8.2 KEYPAD SETTINGS
You can modify the keypad settings to suit your needs (Refer to Figure 8.1 on page 15).
1. Scrolling Speed refers to the amount of time that a message will remain on the screen before moving to the
next message.
2. Backlight refers to the illumination behind the buttons and LCD screen.
3. Contrast refers to how dark or pale characters will appear on the screen.
Figure 8.1: : Modifying LCD screen settings
8.3 SET TIME & DATE
To Set the time and date:
1. Enter your [ ACCESS CODE ] and press the [ TRBL ] button.
2. Press the [8] button.
3. To change the time, place the cursor under the number you want to change by using the [
S] button and enter
the time according to a 24-hour clock (i.e. 9 a.m. is 09:00 and 9 p.m. is 21:00).
4. To change the date, place the cursor under the number you want to change and enter the correct date accord-
ing to year/month/day.
5. Press the [ ENTER ] button to save and exit.
8.4 PROGRAMMING CHIME ZONES
You can program the keypad to emit a rapid, intermittent beep tone whenever designated zones are opened or only
when opened between certain hours. These zones are referred to as Chime Zones. Your installer can also program
your Chime zones to beep upon closure.
1. Enter your [ ACCESS CODE ]
2. Press the [9] button.