LCD Digital DGP2-641 - Manual (Page 20)

20 System Manager’s Manual
• Your installer can program the output to deactivate either manually or follow a timer. If programmed to be deactivated
manually, the output will remain activated until you deactivate it. If programmed to follow a timer, the output will
deactivate after the timer has elapsed.
14.4 WHEN USING YOUR INTOUCH...
• In some cases, your telephone’s tone may not be powerful enough to interrupt the InTouch’s voice prompt. If this is the
case, simply wait for the InTouch’s voice prompt to finish before entering your action.
• If your Digiplex Security System and InTouch share the same telephone number, you may be interrupted at times when
using your InTouch.
15.0 TELEPHONE BUTTON FEATURES
Clear = [*]
If you have made an error, press the [*] button on your telephone to clear the error and then re-enter the
information.
Activate/Deactivate InTouch Output = [#] , [0]
To activate or deactivate the InTouch’s output, press the [#] button and then the [0] button on your telephone.
Hang Up = [#] , [9]
When you wish to hang up, press the [#] button and then the [9] button to immediately hang up. The InTouch will
confirm the hang up with “Good-bye”.
If the hang-up feature is not used and if no action is performed after 2 minutes, the InTouch
will hang up automatically.
16.0 INTOUCH EXAMPLE
Nelson has a Digiplex Security System and an InTouch hooked up at home. His security system has two areas.
Both areas are presently armed and the InTouch’s output, which is hooked up to his garage door opener, is
deactivated. Nelson is on his way home and wishes to disarm both areas and open his garage door. Nelson
performs the following:
Nelson first dials the telephone number of the line to which the InTouch is connected to.
When the InTouch picks up, it will prompt Nelson with the following:
“Please enter your code.”
Nelson enters his User Access Code.
The InTouch then prompts Nelson with the following:
“Area 1 Armed”
“Area 2 Armed”
“Output is Deactivated”
“To modify, enter Area number”
Nelson presses the [1] key on his telephone to disarm Area 1.
Your User Access Code must also have access to the areas to which the InTouch is assigned
to.