Lexmark 4227-X00 - Manual (Page 19)

1-8 Service Manual
4227-X00
Setting Printer Functions
1. Press Start/Stop.
2. Press Menu to enter the function menu.
3. Press Item


or Item

until the function menu you want
appears on the display.
Note: The selectable function menu is different depending on the
selected data stream mode (IBM PPDS or Epson emulation) and the
Interface mode (Parallel, RS-232 or RS-422).
4. Press Next  to enter that menu item.
5. Press Item
 or Item  until the value you want appears on the
display.
6. Press Store to save the selected value.
Note: The currently selected default value is displayed with an
asterisk (*).
If you have to change the optional value in another function menu,
repeat steps 3 through 5. Otherwise, go to the next step.
7. To print the function setting, press Item


or Item

until the
Print Settings message appears on the display.
8. Press Start/Stop to print the current setting values.
9. Press Quit to exit the function menus.
Note: If you have changed any settings, the printer performs a
Power-On Self Test, see
“Power-On Self Test (POST)” on page 3-1 .
If you did not change any settings, the printer enters the not-ready
state.