Lucent Technologies MERLIN LEGEND 5 - Manual (Page 235)

MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-17 Programming from the Console
6
■ The middle column, “Additional Information,” contains explanatory
information if necessary.
The System Programming menu in Step 4 is described in ‘‘System Programming
Menu’’ on page 6-8 . For information about the procedure format, see ‘‘Using the
Programming Procedures’’ on page 6-3 .
Console/Display Instructions Additional Information

Display the Menu Mode (main menu) screen.

Select System Programming.

Display the System Programming menu.

Make a selection.
Exiting System Programming 6
Use the information in Table 6–5 to return to the System Programming menu, the
main menu (Menu Mode screen), or the Home screen.
Press the Menu button.
MENU MODE: Select Feature
If the programming console is a QCC, Ext
Press HOME to Exit Program does not appear on this screen.
Directory
Messages
Posted Msg Sys Program
Alarm Clock Maintenance
Timer Ext Program
System Set-up:
On the System Set-up screen, system
Review and Exit
information appears in place of
Size: Large
the x s.
Type: xxxx Size = Large
Operator: xxxx xxxx
Type = Key, Hybrid/PBX, or Behind
Switch
xxxx xxxx xxxx xxxx Operator = Position extension numbers
Exit
Select Exit
System Programming: >
Press the button or function key next to
Make a selection
your selection.
System Extensions
SysRenumber Options
Operator Tables
LinesTrunks AuxEquip
Exit NightSrvce