Lucent Technologies MERLIN LEGEND 5 - Manual (Page 303)

MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-85 Changing Posted Message Labels
6
Planning Guidelines 6
Messages 2 through 20 can be changed through programming. Message 1, DO
NOT DISTURB, cannot be changed.
Valid Entries
1 to 20
Each posted message can have a maximum of 16 characters.
Labels can contain capital letters, numbers, and eight types of characters:
ampersands (&), dashes (-), spaces, periods (.), commas (,), apostrophes (‘),
stars (*), and pound signs (#).
Task List: Changing Posted Message Labels 6
o
Obtain Form 10a, Label Form: Posted Messages.
o
If necessary, read “Labeling” in the Feature Reference for detailed
information about this feature.
o
Plan changes using the planning guidelines above; record the new values
on Form 10a.
o
Open the System Programming menu from the console or a PC with SPM.
o
Program the change(s), following the instructions for “Posted Message” in
the “Labeling” section of
System Programming, Chapter 3, or the summary
programming instructions below.
o
When you have finished, file Form 10a with the rest of the planning forms.
Programming Instructions 6
Console Procedure More
→
Labeling
→
PostMessage
→
Dial message no.
→
Enter
→
Drop
→
Enter message
→
Enter
→
Exit
→
Exit
PC Procedure
→  →  →
Type message no.
→  → 3
+
0 →
Type message
→ " → ! → !