Installation – Lincoln Electric SVM143-A User Manual
Page 8
A-2
INSTALLATION
DH-10
A-2
TECHNICAL SPECIFICATIONS – DH-10 Complete Units or Controls & Heads
WIRE DRIVE HEADS (BOOM MOUNT)•
SPEC.#
TYPE
LOW SPEED RATIO
HIGH SPEED RATIO
Wire Size
Wire Size
Speed
Solid
Cored
Speed
Solid
Cored
K1497-1¤
DH-10
35 - 500 IPM
.025 - 3/32 in.
.030 - .120 in.
50 - 750 IPM
.025 - 1/16 in.
.030 - 5/64 in.
Double Head (0.89 - 12.7 m/m)
(0.6 - 2.4 mm)
(0.8 - 3.0 mm)
(1.25 - 19.0 m/m)
(0.6 - 1.6 mm)
(0.8 - 2.0 mm)
K1497-2
◊
DH-10
35 - 500 IPM
.025 - 3/32 in.
.030 - .120 in.
50 - 750 IPM
.025 - 1/16 in.
.030 - 5/64 in.
Left Head
(0.89 - 12.7 m/m)
(0.6 - 2.4 mm)
(0.8 - 3.0 mm)
(1.25 - 19.0 m/m)
(0.6 - 1.6 mm)
(0.8 - 2.0 mm)
DH-10
55 - 825 IPM
.025 - 1/16 in.
.035 - 5/64 in.
80 - 1250 IPM
.025 - .045 in.
.035 - .045 in.
Right Head
(1.40 - 21.0 m/m)
(0.6 - 1.6 mm)
(0.9 - 2.0 mm)
(2.00 - 31.8 m/m)
(0.6 - 1.2 mm)
(0.9 - 1.2 mm)
K1563-1
LN-10
35 - 500 IPM
.025 - 3/32 in.
.030 - .120 in.
50 - 750 IPM
.025 - 1/16 in.
.030 - 5/64 in.
Single Head
(0.89 - 12.7 m/m)
(0.6 - 2.4 mm)
(0.8 - 3.0 mm)
(1.25 - 19.0 m/m)
(0.6 - 1.6 mm)
(0.8 - 2.0 mm)
K1563-2
LN-10
55 - 825 IPM
.025 - 1/16 in.
.035 - 5/64 in.
80 - 1250 IPM
.025 - .045 in.
.035 - .045 in.
Single Head
(1.40 - 21.0 m/m)
(0.6 - 1.6 mm)
(0.9 - 2.0 mm)
(2.00 - 31.8 m/m)
(0.6 - 1.2 mm)
(0.9 - 1.2 mm)
K679-1*
Synergic 7F
50 - 770 IPM
.025 - 1/16 in.
.035 - 5/64 in.
---
---
---
Std Drive
Single Head* (1.27 - 19.5 m/m)
(0.6 - 1.6 mm)
(0.9 - 2.0 mm)
K679-2*
Synergic 7F
---
---
---
80 - 1200 IPM
.025 - .045 in.
.035 - .045 in.
Hi.-Sp. Drive Single Head*
(2.00 - 30.5 m/m)
(0.6 - 1.2 mm)
(0.9 - 1.2 mm)
CONTROLS SECTION OF COMPLETE UNITS
SPEC.#
TYPE
INPUT POWER
PHYSICAL SIZE•
TEMPERATURE RATING
Dimensions
Height
Width
Depth
Weight
Operating
Storage
K1499-1
Double Head 40 - 42 Vac + 10%
20.50 in.
19.75 in.
31.50 in.
84.5 lbs
Control
Bench Model 4.0 Amps 50/60 Hz (520.7 mm)
(501.7 mm)
(800.1 mm) (38.3 kg)
+40°C to
+40°C to
-20°C
-40°C
K1499-2
Double Head
Control
Bench Model
• Excluding Wire Reel - More detailed dimensions and weight information can be found in Section F of this manual.
• Excluding Wire Reel - More detailed dimensions and weight information can be found in Section F of this manual.
CONTROLS (BOOM MOUNT)
SPEC.#
TYPE
INPUT POWER
PHYSICAL SIZE•
TEMPERATURE RATING
Dimensions
Height
Width
Depth
Weight
Operating
Storage
K1496-1
∆
DH-10
40 - 42 Vac + 10%
14.80 in.
14.20 in.
4.20 in.
18.0 lbs
+40°C to
+40°C to
Control
Controls
4.0 Amps 50/60 Hz (375.9 mm)
( 360.7mm)
(106.7 mm) (8.2 kg)
-20°C
-40°C
• Excluding Wire Reel - More detailed dimensions and weight information can be found in Section F of this manual.
∆
Included with all K1521-[ ] DH-10 Standard and Zipline Boom Packages
The K1496-1 DH-10 control can be used with any of the following Wire Drive Heads
• Excluding Wire Reel - More detailed dimensions and weight information can be found in Section F of this manual.
¤ Included in K1521-1,-2,-3 DH-10 Boom Packages.
◊
Included in K1521-4,-5,-6 DH-10 Boom Packages.
*Single head drives use 4-roll drives with 2 driven rolls (Drive roll kits not common with -10 Series drives)
The K1499-1 or -2 DH-10 consists of a control and a double head 10 series wire drive assembly pre-
mounted on a platform with two 2 in. O.D. spindle mountings. Specifications for the units follow:
The various components of the DH-10 system are available separately or in kits for mounting on boom
assemblies. The description of the various components follow:
WIRE DRIVE SPECIFICATIONS FOR COMPLETE UNITS•
SPEC.#
TYPE
LOW SPEED RATIO
HIGH SPEED RATIO
Wire Size
Wire Size
Speed
Solid
Cored
Speed
Solid
Cored
K1499-1 DH-10
35 - 500 IPM
.025 - 3/32 in.
.030 - .120 in.
50 - 750 IPM
.025 - 1/16 in.
.030 - 5/64 in.
Double Head
(0.89 - 12.7 m/m)
(0.6 - 2.4 mm)
(0.8 - 3.0 mm)
(1.25 - 19.0 m/m)
(0.6 - 1.6 mm)
(0.8 - 2.0 mm)
K1499-2 DH-10
35 - 500 IPM
.025 - 3/32 in.
.030 - .120 in.
50 - 750 IPM
.025 - 1/16 in.
.030 - 5/64 in.
Left Head
(0.89 - 12.7 m/m)
(0.6 - 2.4 mm)
(0.8 - 3.0 mm)
(1.25 - 19.0 m/m)
(0.6 - 1.6 mm)
(0.8 - 2.0 mm)
DH-10
55 - 825 IPM
.025 - 1/16 in.
.035 - 5/64 in.
80 - 1250 IPM
.025 - .045 in.
.035 - .045 in.
Right Head
(1.40 - 21.0 m/m)
(0.6 - 1.6 mm)
(0.9 - 2.0 mm)
(2.00 - 31.8 m/m)
(0.6 - 1.2 mm)
(0.9 - 1.2 mm)