Lathem LX100 User Manual
Page 10
Lathem Security Solutions
Page 10
Select badge to assign as a Master, and place it over the reader
window. Note: If this is a current User badge, you must first
delete this User from the LX100 before it can be added as a
Master.
The light will flash blue five times, and the Master badge is now
programmed. Place the extra Master badge sticker included with
the lock on the corner of the badge.
Test your new Master badge by placing it back over the reader
window.
You should hear a short beep, followed by 5 flashing
blue lights. Your Master badge has been successfully
programmed.
If you see a red light and hear 3 quick beeps the Master badge
was not successfully programmed. Repeat these steps until
successfully added.
Light
Flashes 5
Times
Touch Badge
or Fob to be
programmed
as a Master
Master
Badge
Sticker