Meeting mode” setting (lock bypass) – Lathem LX100 User Manual
Page 15
LX100 User’s Guide
Page 15
“Meeting Mode” Setting (Lock Bypass)
Warning: Meeting Mode disables the lock and bypasses the
use of badges for authorization. When in this mode, the lock
will function only as a door handle. These badges will serve as
“on/off switches” if a room is being used for a long meeting, etc.
1. The badge(s) you assign to Meeting Mode will serve this
function solely and cannot be used as a User badge. So,
if you have a badge that’s been programmed as a User
badge and want to reprogram it as Meeting Mode badge,
you must first clear the User badge programming as
previously described in “Deleting an Individual Badge”.
2. Remove Interior handle & place Master badge on display
once, then remove. After you hear one “beep” and see
blue light flashing, press the programming button once.
Press
button
ONCE
Touch
Master
Badge to
Reader
Window