Lathem LX100 - Manual (Page 28)

Lathem Security Solutions
Page 28
Strike Plate & Dust Boot Installation
1. If you are installing on an existing door jamb, you may be
able to use your existing strike. However, it is recommended
that you use the strike included.
2. On a new door, use the “Strike Plate Cutting Template” to
mark and install the strike plate. Center the metal strike plate
over the dust boot with the curved edge facing the interior of
the room. The goal is to have the metal strike plate flush with
your door jamb.
3. Insert dust boot and secure strike plate with screws provided.
Test opening and closing of door and adjust as needed.