Lathem LX100 - Manual (Page 6)

Lathem Security Solutions
Page 6
Badges and Key Fobs
The LX100 supports the use of Lathem proximity ID badges
(included with lock) or optional Lathem proximity key fobs that
users can simply attach to their key chains. The use of badges
or key fobs is an individual user preference, and they can be
used interchangeably on any lock.
A badge or key fob can be programmed to be one of two distinct
types of users of the LX100: Master or User
Master Badges
The Master not only allows access through the door, but also
provides additional administrative rights to the holder so they can
add and remove users as needed. The LX100 supports up to two
(2) Master badges or key fobs. Each Master can add up to 59
individual Users. Therefore, the LX100 supports up to 120 total
authorized users including the two Masters. The LX100 comes
with one preprogrammed Master badge, which is identified by
the global key sticker located in the lower left corner of one of the
badges. This Master badge can begin accessing the lock and
adding or removing users as needed without any additional
programming (see Adding a Master).
Master
Badge
Sticker