Linksys EPSX3 - Manual (Page 25)

EtherFast 10/100 PrintServers
43
Instant EtherFast ® Series
42
7. Click the button that looks like three dots beside the Resident Server field.
With this, you can browse and select the name of the server to which you
want to assign this NDPS Manager.
8. Click the button that looks like three dots beside the Database Volume
field. With this, you can browse and assign a location to the NDPS Manager
database, e.g., TECH_50_SYS.TeSupp.
9. Click the Create button. The new NDPS Manager will appear in the main
Browser window.
10. Go to your NetWare server and type LOAD NDPSM. Activate the NDPS
Manager and select the NDPS Manager you just created.
Creating NetWare 5.x NDPS Printer(s)
After creating an NDPS Manager, you can now create NDPS printers by using
NetWare Administrator. To create Public Access Printers using the NDPS
Manager Object in the NetWare Administrator application, follow these steps:
1. Run the NetWare Administrator application Nwadmn32.exe, which should
be located in F:\public\win32 on your network. Otherwise, see your
NetWare user guide or your network administrator to find the file location.
2. Right-click on the container where you would like to create the printer and
select Create.
3. Select NDPS Printer.
4. Give the printer a name and click the Create button.
5. The “Create Printer Agent” will appear. Click the Browse button for the
NDPS Manager name. Select the Manager and click the OK button.
Note: To autoload the NDPS Manager each time you boot up the
server, add the following line to your server's AUTOEXEC.NCF file:
LOAD NDPSM P_MGR.TeSupp
Attention! “NDPSM P_MGR. TeSupp” must be substituted for your
actual object name, as it is only an example name.
To enable printing from the PrintServer on a pure IP NetWare 5.x network:
• First, create an NDPS Manager on your server. This only needs to be done
once, even if you create more than one NDPS printer.
• Create NDPS printers with NetWare Administrator.
• Configure Public Access Printers for your computers to print from.
Creating an NDPS Manager
1. Log on to a NetWare 5.x file server as an Administrator.
2. Run the NetWare Administrator application Nwadmn32.exe, which should
be located in F:\public\win32 on your network. Otherwise, see your
NetWare user guide or your network administrator to find the file location.
3. When the program runs, select the organization on NetWare Administrator
in which you want the NDPS Manager object to reside, e.g. TeSupp.
4. Right-click on the Create button and select Object from the menu bar. The
“New Object” window appears.
5. Select NDPS Manager, which will bring up the “Create NDPS Manager
Object” window.
6. Type a new name into the NDPS Manager Name field at the top of the
window, e.g., P_MGR.
Figure 10-1