Linksys EPSX3 - Manual (Page 3)

EtherFast 10/100 PrintServers Instant EtherFast ® Series
Table of Contents
Chapter 1: Introduction 1
The EtherFast 10/100 PrintServers 1
Features 1
Package Contents for the 3-Port PrintServer 2
Package Contents 2
Chapter 2: Getting to Know the EtherFast 3-Port
PrintServer
3
The 3-Port PrintServer’s LEDs 3
The 3-Port PrintServer’s Ports 4
Chapter 3: Getting to Know the EtherFast 1-Port
PrintServer 5
The 1-Port PrintServer’s LEDs 5
The 1-Port PrintServer’s Ports 6
Chapter 4: Hardware Installation 7
Overview 7
Finding the PrintServer’s Default Name 7
Connecting the PrintServer to Your Network 7
Chapter 5: Windows Driver Setup 9
Installing the Windows Drivers 9
Chapter 6: Bi-Admin: PrintServer Management 15
Installing the Bi-Admin Management Utility 15
Starting the Bi-Admin Management Utility 15
Using Bi-Admin 17
Setting the PrintServer’s IP Address 19
Changing the Device Name 19
Enabling and Disabling Protocols 20
Attaching Bi-Admin to a Remote PrintServer 20
Resetting the PrintServer 20
Restoring Factory Default 20
Chapter 7: Configuring the PrintServer Using
the Web-based Utility
22
Accessing the Web-based Utility 22
The Server Page 23
The Printer Page 23
The TCP/IP Page 24
The Status Page 25
Chapter 8: Advanced Properties 26
The AppleTalk Page 26
The Logical Printers Page 28
The NetBEUI Page 29
The NetWare Page 30
The SNMP Page 32
Chapter 9: Internet Printing Protocol (IPP) 34
Windows IPP Client Setup 34
Chapter 10: NetWare Services Setup 40
Overview 40
Print Server Mode and Remote Printer Mode in NetWare 40
Pure IP NetWare 5.x Setup 41
IPX Printing in NetWare 5.x, 4.x and 3.x 45
Appendix A: Troubleshooting 47
Hardware Issues 47
General Printing Issues 47
NetWare Printing Issues 48
Windows Printing Issues 53
Appendix B: DHCP Support for the PrintServer 56