Linksys EPSX3 - Manual (Page 37)

EtherFast 10/100 PrintServers
Appendix F: Specifications for
the 3-Port PrintServer
Model Number EPSX3 ver. 2
Standards IEEE 802.3, IEEE 802.3u
Protocol CSMA/CD
Topology Star
Ports Two DMA-Equipped Bi-directional Parallel Ports,
One Parallel Printer Port,
One Auto-Sensing RJ-45 10/100 Port
Port Speed (Mbps) 10 or 100 (Half Duplex)
20 or 200 (Full Duplex)
Memory 512 KB RAM Buffer, 512 KB Flash Memory
Cabling Type Printer Cabling: IEEE 1284 Standard Printer
Cable
Network Cabling: UTP Category 5 or Better
LEDs Power, Link (for LAN),
Status and Error (for each Printer)
Button Reset
Dimensions 7.32" x 6.06" x 2.52"
(186 mm x 154 mm x 64 mm)
Unit Weight 15.2 oz. (0.43 kg)
Power Input 12V DC, 800 mA
Certifications FCC Class B, CE Mark
Operating Temp. 32ºF to 104ºF (0ºC to 40ºC)
Storage Temp. -4ºF to 158ºF (-20ºC to 70ºC)
Operating Humidity 10% to 85%, Non-Condensing
Storage Humidity 5% to 90%, Non-Condensing
67
Instant EtherFast ® Series
Environmental
Please be aware that although Linksys provides instructions for the setup of the
TCP/IP protocol, these instructions are provided for reference only. Linksys
will not provide technical support for the configuration and troubleshooting of
the TCP/IP protocol. For full instructions on using TCP/IP, consult your oper-
ating system’s documentation.
66