Linksys EPSX3 - Manual (Page 5)

EtherFast 10/100 PrintServers
3
Chapter 2: Getting to Know the
EtherFast ® 3-Port PrintServer
Power Green. The Power LED illuminates when the PrintServer is
powered on.
Link Green. If the LAN Link LED is continuously illuminated, the
PrintServer is successfully connected to a device through that
port.
Printer 1 (P1), Printer 2 (P2), Printer 3 (P3) LEDs
Status Green. For each printer, the Status LED illuminates when the
PrintServer is connected to a printer that is ready to print.
Error Red. The Error LED lights up when there is a problem print-
ing to the indicated printer.
Instant EtherFast ® Series
• One Linksys EtherFast ® 10/100 3-Port PrintServer
• One Setup Utility CD-ROM
• One Power Adapter
• One User Guide (not shown)
• One Registration Card (not shown)
• One Linksys EtherFast ® 10/100 1-Port PrintServer
• One Setup Utility CD-ROM
• One Power Adapter
• One User Guide (not shown)
• One Registration Card (not shown)
2
Package Contents for the 3-Port PrintServer
The 3-Port PrintServer’s LEDs
Package Contents for the 1-Port PrintServer
Figure 1-1
Figure 1-2
Figure 2-1