Using message waiting / mailbox – Lenoxx Electronics PH5435 User Manual

Page 14

Advertising
background image

IB-PH5435-WC-E-032805

CALLER ID FEATURES

Deleting the Data from the Caller ID List

TO DELETE THE CALLER ID MEMORY ONE BY ONE ONLY

1. Display the caller’s ID you want to delete.
2. Press the DELETE button, the display will show “DELETE

CALL?”, press the DELETE button once more, the display
changes to show the next or previous call, and the data is
deleted.

TO DELETE ALL THE CALLER ID MEMORIES

1. When the handset is on the base only, press the DELETE

button and hold for 3 seconds, the display shows “DELETE
ALL?”.

2. Press the DELETE button once more, the display changes to

“NO CALLS” and all the Caller ID memories (including the new
call memories) are deleted.

Using Message Waiting / Mailbox

12

To use the Message Waiting feature, you must subscribe to this
service if available from your local telephone company.
This phone will only respond to FSK type of message delivery.
1. If the message is sent by the telephone company which is

preceded by a ring, the MESSAGE WAITING symbol
will appear in the display.

2. After you retrieve your message(s), the telephone company

will send a clear signal (by a ring) to your phone. The symbol

will turn off until a new message is received.

Sometimes the telephone company will not send a message
clear signal to your phone, then you will have to clear the
message waiting symbol manually by holding the DELETE
button, then pressing the UP button.

Note: You can delete the data either when the handset is on

the base or it is picked up.

IB-PH5435-WC-E-032805.pmd

4/1/2005, 12:28 PM

14

Advertising