Trouble shooting, Continued) – Lenoxx Electronics PH5435 User Manual

Page 17

Advertising
background image

IB-PH5435-WC-E-032805

NOTE:

1. If problems with your telephone service occur later, try to

determine if the trouble is with the telephones you own or with
the telephone company equipment. Unplug the telephone and
try it on another jack in a different room or in a neighbor’s home
to see if the phone line or the set is bad. If the known working
phone does not operate properly on that line, contact your local
telephone company for assistance.

2. If disconnection of your phone ends the problem, your phone

may be the source of the trouble and it should be tested and
repaired if necessary before it is reconnected.

3. There are no user maintainable parts or adjustments on this

set. Should your phone require repairing, contact us for
instructions (except for cords which you can buy at any phone
store).

TROUBLE SHOOTING

(continued)

PROBLEMS

CHECK

You picked up the phone before the second

ring, or your phone received no information

or unclear information. Static can cause this

message. If this condition persists, contact

your local telephone company to ensure

there is no problem with your phone line.

shows

in the display

C annot erase

all records in

memory

Your language is set for French or Spanish.

To reset the language, press and hold the

DELETE button and then press the DOWN

button. While “ ” is flashing, press the

DELETE button to confirm. The language will

be set to English mode.

C aller ID dis-

plays words like

or

or

or

or

Memory Dialing

does not work

The caller may have a blocked number to

prevent Caller ID identification, or it may be

an overseas call or you may have noise on

the line during that call.

Caller’s number

is not registered

to the Caller ID

memory

Check with your telephone company if this

service is available and if you have

subscribed for it.

Message Wait-

ing does not

work

The MEMORY button has no stored number.

Please store the number again. Press the

STORE button, dial the number and then

press the MEMORY locations.

Pressing

a

MEMORY button

not

display

stored number

15

C heck if you have stored the numbers

correctly by pressing that memory location

button(s).

To erase

ALL call records, make sure the

phone is not in use. Press and hold the

DELETE button for 3 seconds, the display

will show “DELETE ALL?”, press the DELETE

button again.

IB-PH5435-WC-E-032805.pmd

4/1/2005, 12:28 PM

17

Advertising