Lenoxx Electronics PH5435 - Manual (Page 8)

IB-PH5435-WC-E-032805
GETTING STARTED
ATTACHING THE DESK STAND
Step 2: Telephone Installation
(continued)
1. Insert the 4 raised tabs of the stand into the wider part of the
base slots.
2. Slide the stand up until it locks into place.
6
Step 1 Step 2
CONNECTING THE TELEPHONE
If your telephone outlet is not modular, contact your telephone
company for assistance.
3. Route the LINE CORD into the channel on the bottom of the
base.
1. Connect the COILED HANDSET CORD to the bottom of the
handset and the left side of the base (Step 1).
2. Connect the straight telephone line cord to the LINE CORD
jack on the bottom of the base unit and telephone outlet on the
wall (Step 2). (If you want to mount the telephone on the wall,
refer to Wall Mounting instruction of this booklet.)
Note: Connect cords before attaching the desk stand.
IB-PH5435-WC-E-032805.pmd 4/1/2005, 12:28 PM 8