Lifescan SureStep blood glucose monitoring system - Manual (Page 18)

10
CODING
Code numbers are used to calibrate
the SURESTEP
® Test Strip with
the SURESTEP ® Meter for accurate
results. You must code the meter
before using it for the first time. You
must check the code every time you
change to another package of test
strips. Check that the code number
on the display matches the code
number on the test strip package.
Caution: If the code numbers do
not match, you may get inaccurate
results.
Three Easy Steps to Coding
Step 1: Turn on the Meter.
Press the blue power button. The
result from your last blood glucose
or control solution test will appear.
Next, the meter code will appear
for a few seconds.
C O D I N G T H E M E T E R
(Example)
(Example)
LSI-98-090 SS booklet.B 7/13/98 11:41 AM Page 10