Lifescan SureStep blood glucose monitoring system - Manual (Page 22)

14
Follow the test procedure, using
SURESTEP
® Glucose Control
Solution instead of blood.
Before Testing, Check the Code.
After turning the meter on, the last
result appears, followed by the
CODE
symbol and number. If the code on
the meter does not match the code
on the test strip package, press the
green C button until the codes match.
Step 1: Apply a Small Drop of
Control Solution.
After shaking the control solution
vial, apply one drop of control
solution to the pink test square.
Note: Applying too much control
solution may cause out-of-range
results and dirty the meter.
▼
C Button
(Example)
CHECKING
LSI-98-090 SS booklet.B 7/13/98 11:41 AM Page 14