Lifescan SureStep blood glucose monitoring system - Manual (Page 36)

28
TESTING
You have applied too much blood
to the test strip if the entire white
pad is soaked. You must begin the
test with a new test strip to avoid
false results from too much blood. Step 2: Check the Confirmation
Dot.
After a few seconds, look at the
confirmation dot on the back of
the test strip. If it is completely
blue, go on with the test.
Too Much Blood
Enough Blood
Confirmation
Dot
Front
Back Front
LSI-98-090 SS booklet.B 7/13/98 11:41 AM Page 28