Lifescan SureStep blood glucose monitoring system - Manual (Page 32)

24
TESTING
Step-by-Step Test Procedure
When learning to use the meter for
your own diabetes care, first do
a control solution test. When the
control solution test result is within
the control range, you are ready to
practice by testing your blood. Next
you should perform three blood glu-
cose tests in a row. You will know you
have applied blood correctly when the
confirmation dot turns completely
blue and you obtain a glucose result
from the meter.
Choose a clean, dry work surface.
Make sure you have your:
SURESTEP ® Blood
Glucose Meter
Unused,
sterile lancet
PENLET ® II
Sampler
SURESTEP ®
Test Strip
LSI-98-090 SS booklet.B 7/13/98 11:41 AM Page 24