Lindy iSWITCH User Manual
Page 22
Advertising
22
18. Arrow down to Trap and hit enter. This screen allows the user to send Traps about the UPS to ten IP
Addresses (not required). Also, you may determine the severity levels and what type of access, read only or
read and write, to assign to a particular IP manager. Hit the “Escape” key to return to the main menu.
19. Once you have finished with the entire configuration, cursor down to Save_Restart and hit enter. Make sure
you want to overwrite the old settings (y/n)? Hit the y key, then hit enter.
Advertising