Linear REMOTE ACCESS SOFTWARE DVS-1200 - Manual (Page 26)

24
4.9 SENSORS
PURPOSE:
To display and edit sensors installed in the Console’s memory. Up to 24
sensors may be installed, each with its own type, restore and supervision
options. The status of the sensor selected is also displayed.
☞ NOTE: To display and edit sensors installed in the Console,
the sensor data must fi rst be received from the Console (see
Section 5.5).
USER RESPONSE:
SENSOR TYPE
✦ Click on the sensor in the menu tree to view it.
✦ View or edit the SENSOR TYPE. The sensor type options are:
NOT INSTALLED: No sensor has been stored in this sensor location. Also can be used to
remove a sensor from the Console’s memory. Sensors cannot be added with this menu.
HOME AUTOMATION: Sensor will trigger the Console’s home-automation output.
EMERGENCY: Sensor will trigger the emergency siren and report the emergency code to the
Central Station.
POLICE: Sensor will trigger the silent panic alarm and report the police code to the Central
Station.
FIRE: Sensor will trigger the fi re siren and report the fi re code to the Central Station.
217473 C - IMAGE 26