Linear REMOTE ACCESS SOFTWARE DVS-1200 - Manual (Page 42)

40
5.3 CONNECTING TO A CONSOLE
PURPOSE:
Causes the RA-2400 to connect to the DVS-2400 Console. The RA-2400
will try to connect to the Console either locally or remotely, depending
on the Communications Setup (see Section 3.3).
☞ NOTE: The Communications Setup can be reviewed by pressing
the COMM SETUP... button in the Send/Receive window.
USER RESPONSE:
☞ NOTE: Before connecting to a Console, it is recommended that all
of the sensors used in the system be entered into the Console’s
memory. This will prevent having to connect to the Console again
after programming if modifi cation of the sensor options is required.
BEFORE CONNECTING
✦ Be sure the computer’s modem is powered on, connected, and
tested as described in Section 1.5 of this manual.
✦ Check that the Console is powered on.
✦ Be sure that the Account Profi le you want to associate with the
particular Console is selected in the Choose an Account box.
217473 C - IMAGE 42