Linear REMOTE ACCESS SOFTWARE DVS-1200 - Manual (Page 35)

33
4.13.4 4 BY 2 POINT-TO-POINT DISARMING (OPENING) CODES
PURPOSE:
To view and edit the duress report code. This report is sent when the
system is armed or disarmed using the duress access code.
☞ NOTE: With either reporting method, the duress code is the same.
USER RESPONSE:
ACCESS CODES (OPEN)
✦ DURESS: Enter a new two-digit duress code if it needs to be
changed.
☞ NOTE: Entering a “0” for a duress code will prevent it from
reporting.
217473 C - IMAGE 35