Linear REMOTE ACCESS SOFTWARE DVS-1200 - Manual (Page 32)

30
4.13.1 4 BY 2 POINT-TO-POINT ALARM CODES
PURPOSE:
To view and edit the 24 sensor/zone alarm report codes.
☞ NOTE: 4 by 2 Point-to-Point Reporting must be selected (see
Section 4.13) for these codes to report.
USER RESPONSE:
ZONE CODES
✦ Enter a new two-digit alarm code for any sensor/zone that needs
to be changed.
☞ NOTE: Entering a “0” for an alarm code will prevent that zone from
reporting.
217473 C - IMAGE 32