Controls and features – Lincoln 1999 Continental User Manual

Page 90

Advertising
background image

Theft indicator

The theft indicator on top of the dash will operate as follows:
• When the ignition is OFF, the theft indicator will flash briefly every 2

seconds to indicate the SecuriLock

௢ system is protecting your

vehicle.

• When the ignition is turned to RUN or START, the theft indicator will

light for 3 seconds and then go out. If the theft indicator stays on for
an extended period of time or flashes rapidly, have the system
serviced by your dealership or a qualified technician.

Programming spare SecuriLock

ி

keys

Spare SecuriLock

௢ keys can be purchased from your dealership and

programmed to your SecuriLock

௢ passive anti-theft system (up to a

total of 8 keys). Your dealership can program your new SecuriLock

key(s) to your vehicle or you can do it yourself using the following
simple procedure. To program a new SecuriLock

௢ key yourself, you will

need two previously programmed SecuriLock

௢ keys (keys that already

operate your vehicle’s engine). If two previously programmed
SecuriLock

௢ keys are not available (one or both of your original keys

were lost or stolen), you must bring your vehicle to your dealership to
have the spare SecuriLock

௢ key(s) programmed.

Procedure to program spare SecuriLock

ி

keys to your vehicle

New SecuriLock

௢ keys must have the correct mechanical key cut for

your vehicle.

Conventional (non-SecuriLock

௢) keys cannot be programmed to your

vehicle.

You will need to have two previously programmed SecuriLock

௢ keys and

the new unprogrammed SecuriLock

௢ key readily accessible for the

procedure. Please read and understand the entire procedure before you
begin.

1. Insert the first previously programmed SecuriLock

௢ key into the

ignition and turn the ignition from OFF to RUN (maintain ignition in
RUN for at least one second).

2. Turn ignition to OFF and remove the first SecuriLock

௢ key from the

ignition.

Controls and features

90

Advertising