Lexmark C77x - Manual (Page 29)

Canceling a copy job
29
Copying
7 Touch Done.
8 Touch Copy It.
When the end of a set is reached, the “Scan the next page” screen appears. Touch Scan the next page, or touch Done.
For more information on the Custom job or the job build setting, see the Menus and Messages Guide on the Software and
Documentation CD.
Canceling a copy job
While the document is in the ADF
When the ADF begins processing a document, the scanning screen is displayed. You can cancel the copy job by touching
Cancel Job on the touch screen.
Touching Cancel Job cancels the entire job that is being scanned. The scanning screen will be replaced with a
“Canceling scan job” screen. The ADF will clear all pages in the ADF and cancel the job.
While copying pages using the flatbed
During the copy process, the “Scan the next page” screen appears. To cancel the copy job, touch Cancel Job on the touch
screen.
Touching Cancel Job cancels the entire job that has been scanned. The scanning screen will be replaced with a
“Canceling scan job” screen. Once the job has been flushed, the touch screen will return to the copy screen.
While the pages are being printed
To cancel the print job, touch Cancel Job on the touch screen, or press cancel on the numeric keypad.
Touching Cancel Job or pressing cancel on the keypad cancels the remaining print job. Once the job has been
deleted, the touch screen will return to the home screen.
Copy tips
The following tips may improve the MFP copy quality. For additional information or to solve copy problems, see Solving
copy quality problems.
Question Tip
When should I use Text mode? • Text mode should be used when text preservation is the main goal of the copy, and
preserving images copied from the original document is not a concern.
• Text is best used for receipts, carbon copy forms, and documents that only contain
text or fine line art.
When should I use Text/Photo
mode? • Text/Photo mode should be used when copying an original document that contains
a mixture of text and graphics.
• Text/Photo is best used for magazine articles, business graphics, and brochures.
When should I use
Printed Image mode? Printed Image mode should be used when copying halftone photographs, graphics
such as documents printed on a laser printer, or pages from a magazine or
newspaper.
When should I use Photograph
mode? Photograph mode should be used when the original document is a high-quality
photograph or inkjet print.