Lexmark C77x User Manual
Page 58
Advertising
Loading standard trays and optional trays
58
Printing
5
Place the paper in the tray as shown, print side down.
Do not load bent or wrinkled paper.
Note: Do not exceed the maximum stack height. Overfilling the tray may cause jams.
6
Squeeze the front guide lever and slide the guide until it firmly touches the stack of paper.
7
Reinstall the tray.
Make sure the tray is pushed completely into the printer.
8
If you are loading a different type of media than was previously loaded in the tray, change the Paper Type setting
for that tray on the operator panel.
Maximum stack height indicator
Advertising