Link electronic MC-6 - Manual (Page 8)

8
Amplifier Front Panel Function Control Amplifier Front Panel Function Control
BB
efore attempting any system interconnection, please familiarize yourself with the front panel control of the MC-6 Multi-Channel Power Amplifier.
The description below refers to the illustration above.
FRONT PANEL STANDBY/POWER BUTTON: Press this button to operate the amplifier. Press again to place the amplifier in Standby mode. This
button will illuminate when the amplifier is operational. When the button is not illuminated, all amplifier inputs are muted and internal circuitry
reverts to power-saving (Standby) mode. Anomalous operating conditions will place the amplifier in Standby mode and will prevent the amplifier
from being switched back on again until such a condition is eliminated.
To avoid spurious noises and possible damage to the amplifier’s internal circuitry, the amplifier should be switched to Standby mode when
connecting or disconnecting any rear panel connections.
Note:
Note: All ON/OFF power switching should be initiated ONLY with this button. The amplifier should not be disconnected from AC power without
first placing the amplifier in Standby mode.