LevelOne FBR-1700TX - Manual (Page 28)

LevelOne Broadband Router User Guide
24
Setup Wizard
The first time you connect to the LevelOne Broadband Router, the Setup Wizard will run auto-
matically. (The Setup Wizard will also run if the LevelOne Broadband Router's default setting
are restored.)
1. Step through the Wizard until finished.
• You need to know the type of Internet connection service used by your ISP. Check the
data supplied by your ISP.
• The common connection types are explained in the tables below.
2. On the final screen of the Wizard, run the test and check that an Internet connection can be
established.
• If the connection fails, check your data, the Cable/DSL modem, and all connections.
• If your ISP has recorded your MAC (hardware) address, exit the Wizard and select
MAC Address on the Advanced menu. Change the MAC address to match the value
expected by your ISP.
Cable Modems
Type Details ISP Data required
Dynamic
IP Address Your IP Address is allocated
automatically, when your con-
nect to you ISP. None.
Static (Fixed)
IP Address Your ISP allocates a permanent
IP Address to you. IP Address allocated to you.
@Home type
service. The IP Address is allocated
automatically, but a "Host
Name" and "Domain Name" are
allocated to you. Sometimes, the
ISP will record the MAC (Hard-
ware) address of your PC. Host Name and Domain Name;
sometimes the MAC (hard-
ware) address.
DSL Modems
Type Details ISP Data required
Dynamic
IP Address Your IP Address is allocated
automatically, when your con-
nect to you ISP. None.
Static (Fixed)
IP Address Your ISP allocates a permanent
IP Address to you. IP Address allocated to you.
PPPoE You connect to the ISP only
when required. The IP address is
allocated automatically. User name and password.
PPTP Mainly used in Europe.
You connect to the ISP only
when required. The IP address is
usually allocated automatically,
but may be Static (Fixed).
• PPTP Server IP Address.
• User name and password.
• IP Address allocated to
you, if Static (Fixed).