LevelOne FBR-1700TX - Manual (Page 55)

Operation and Status
51
Data - Status Screen
The "Printer" section on this screen is only included on LevelOne Broadband Routers which
include a printer port (FBR-1401TX and the FBR-1700TX).
Internet
Connection Method This indicates the current connection method, as set in the Setup
Wizard.
Internet IP Address This IP Address is allocated by the ISP (Internet Service Provider).
Connection Status Current connection status:
• OK
• No connection
• Error
If there is an error, you can click the "Connection Details" button
to find out more information.
"Connection Details"
Button Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "log" may also be available.
"Access Log"
Button Click this button to open a sub-window and view details of outgo-
ing connections to the Internet. The log contains the following
data:
• Source IP Address - The IP Address of the local PC request-
ing the Internet connection.
• Destination - The Internet address which was requested. If
the URL Filter is enabled, this address will be shown as a
URL. Otherwise, the IP address will be displayed.
• Blocked - If the request was blocked by the URL Filter
function, this will display "Yes". Otherwise, it will be blank.
LAN
IP Address The IP Address of the LevelOne Broadband Router.
Network Mask The Network Mask (Subnet Mask) for the IP Address above.
DHCP Server This shows the status of the DHCP Server function - either "En-
abled" or "Disabled".
For additional information about the PCs on your LAN, and the IP
addresses allocated to them, use the PC Database option on the
Advanced menu.
System
Device Name This displays the current name of the LevelOne Broadband
Router.
Firmware Version The current version of the firmware installed in the LevelOne
Broadband Router.
"System Data"
Button Clicking this button will open a Window which lists all system
details and settings.