LevelOne FBR-1700TX - Manual (Page 45)

PC Configuration
41
Printer Setup for Windows
This section is not applicable to LevelOne Broadband Routers which do not
have a Printer Port.
The FBR-1401TX and the FBR-1700TX LevelOne Broadband Routers provide printing support
for 2 methods of printing from Windows:
• Print Port Driver. After installing the Print Port Driver, Windows users can print directly
to the LevelOne Broadband Router. Print jobs are spooled (queued) on each PC.
The supplied Print Port Driver supports Windows 95/98, Windows ME, Windows NT4.0,
Windows 2000 and Windows XP.
• LPD/LPR Printing. If using Windows NT 4.0 Server or Windows 2000 Server, LPD/LPR
printing can be used. No software needs to be installed on either the Windows Server or
each client PC. Print jobs will be spooled (queued) on the Windows Server, and can be
managed using the standard Windows Server tools.
Print Port Driver Setup
The following procedure is for all versions of Windows (95/98/ME, NT4.0, 2000, XP). The
Windows "Add Printer" screens will vary depending on your version or Windows, but the
procedure is the same:
1. Insert the supplied CD-ROM into your drive. If the setup program does not start automati-
cally, run SETUP.EXE in the root folder.
2. At the Select Components screen, select the Print Port Driver option.
3. Follow the prompts to complete the installation.
4. The Print Port Setup will then run, and the following screen will be displayed.
Figure 26: Print Port Setup
5. Select the desired device and port, and then click the "Add" button.