LOREX Technology DIGITAL VIDEO SURVEILLANCE RECORDER LH010 ECO BLACKBOX SERIES - Manual (Page 119)

103
Appendix C: Connecting Additional External Monitors
Appendix C: Connecting Additional External Monitors
Use the Video Output ports (BNC) on the rear panel of the system to connect an external
monitor(s). This is useful if you need to monitor the system from a second location (e.g. a
back office).
The mouse and system interface are shown on either the VGA or BNC monitor. Press 0 on
the remote control three times to switch the mouse and system interface between VGA and
BNC monitors.
EXTERNAL MONITORS
(Not Included)
(Not Included)
PRIMARY MONITOR (VGA)
VGA cable
BNC cable
BNC to RCA adapter
To connect the DVR to a
television using RCA cables,
connect a BNC to RCA
adapter (not included) to the
VIDEO OUTPUT port.
BNC cable
8-channel model shown