LOREX Technology DIGITAL VIDEO SURVEILLANCE RECORDER LH010 ECO BLACKBOX SERIES - Manual (Page 122)

106
Appendix E: Replacing the Hard Drive
5 Carefully flip the DVR back over. Slide the hard drive to the left (if looking at the DVR from the
front) and then lift the hard drive out of the DVR.
Replacing the Hard Drive
To replace the hard drive:
1 Insert 4 hard drive screws into bottom the hard drive and tighten them 1/2 of the way.
2 Place the hard drive with the power and data connectors facing left (if looking at the DVR from
the front) and then slide the hard drive to the right.
3 Reconnect the power and data cables. Each cable can only be connected one way.
Slide the hard drive to the left and
then lift it out of the DVR
Insert the hard drive screws (4x) into the
hard drive and tighten them 1/2 way
Place the hard drive in the DVR with
power and data connectors facing
left and slide to the right
Hard drive power and data
connectors