Connecting bnc cameras to your dvr, Connecting and removing bnc cables – LOREX Technology DIGITAL VIDEO SURVEILLANCE RECORDER LH010 ECO BLACKBOX SERIES User Manual
Page 24
8
Basic Setup
Connecting BNC Cameras to your DVR
1
Connect the male power connector on the BNC extension cable to the female power
connector on the camera.
• Connect the BNC connector to the camera.
2
Connect the female power connector on the BNC extension cable to the power adapter.
3
Connect the BNC connector to one of the Video Input ports on the rear panel of the DVR.
4
Plug the camera power adapter to a power outlet.
Connecting and Removing BNC Cables
BNC (Bayonet Nut Connector) is a special connector that locks on to the system port and
cannot be accidently removed.
To connect or remove a BNC connector:
• Push the BNC connector firmly into the BNC port and simultaneously twist the connector
clockwise to tighten.
• To remove a BNC connector from a BNC port, push and simultaneously twist the connector
counter-clockwise to loosen the BNC connector.
BNC Extension cable
Female power connector
Digital Video
Recorder
(8-channel model shown)
Male power connector
BNC