Appendix e: replacing the hard drive, Removing the hard drive – LOREX Technology DIGITAL VIDEO SURVEILLANCE RECORDER LH010 ECO BLACKBOX SERIES User Manual

Page 121

Advertising
background image

105

Appendix E: Replacing the Hard Drive

Appendix E: Replacing the Hard Drive

The system comes with a pre-installed 3.5" SATA hard drive. You can expand the hard drive
capacity with a single replacement hard drive up to 2 terabyte (TB).

NOTE: It is recommended to use surveillance or security-certified hard drives, which are

designed to be reliable over long periods of time while recording 24/7. Security-certified
hard drives are available at

www.lorextechnology.com

Removing the Hard Drive

To remove the hard drive:

1

Remove the screws from the side panels (1x per panel) and from the rear panel (x3) of the
cover.

2

Gently slide the cover away from the rear panel and lift off. Be careful of sharp edges.

3

Disconnect the power and data cables.

4

Carefully turn the DVR over and loosen the hard drive screws (x4). Do not remove the hard
drive screws or the hard drive will fall and potentially damage the DVR.

Make sure that the power cable has been disconnected before changing the
hard drive.

Loosen the hard drive
screws.
Do not remove the hard
drive screws

Advertising