LOREX Technology DIGITAL VIDEO SURVEILLANCE RECORDER LH010 ECO BLACKBOX SERIES - Manual (Page 19)

3
3 Audio Input: Input for 1 RCA audio-enabled camera (not included).
4 Audio Output: Output for 1 RCA audio channel (e.g. speakers).
5 VGA: Connect a VGA monitor (not included) to view the system interface.
6 LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.
7 USB Port: Connect a USB mouse (included) or USB flash drive (not included) for data backup
or firmware updates.
8 RS485: Connect compatible PTZ cameras (not included).
9 DC12V: Connect the included AC power adapter.
16-Channel
1 Video Input: Connect BNC cameras.
2 Video Output: Outputs the DVR interface to a BNC connection. This allows you to see your
mouse cursor and have full control of the system on a secondary monitor. To switch the
mouse and system interface between BNC and VGA monitors, press 0 three times on the
remote control.
NOTE: Use a BNC to RCA adapter (not included) to connect the DVR to RCA inputs (i.e. for a TV
connection).
3 Audio Output : Output for 1 RCA audio channel (e.g. speakers).
4 Audio Input: Input for 2 RCA audio-enabled cameras (not included).
5 VGA: Connect a VGA monitor (not included) to view the system interface.
6 LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.
7 USB Port: Connect a USB mouse (included) or USB flash drive (not included) for data backup
or firmware updates.
8 RS485: Connect compatible PTZ cameras (not included).
9 DC12V: Connect the included AC power adapter.
10 On / Off Switch : Turns the DVR on or off.
9 4 5 6 8 2 1
3 7
10