Load <src> with <custom string, Load <src> with <type> <size, Load <src> with <size – Lexmark 410 User Manual
Page 159: Load manual feeder with <custom type name
•
Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press
.
•
For more information, press the up or down arrow button until Show me or Tell me more appears, and
then press
.
Load <src> with <custom string>
Try one or more of the following:
•
Load the specified paper into the specified source to clear the message and continue printing.
•
To select the paper tray with the correct paper size or type, press the up or down arrow button until Paper
Changed, Continue
appears, and then press
.
•
Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press
.
•
For more information, press the up or down arrow button until Show me or Tell me more appears, and
then press
.
Load <src> with <type> <size>
Try one or more of the following:
•
Load the specified paper into the specified source to clear the message and continue printing.
•
To select the paper tray with the correct paper size or type, press the up or down arrow button until Paper
Changed, Continue
appears, and then press
.
•
Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press
.
•
For more information, press the up or down arrow button until Show me or Tell me more appears, and
then press
.
Load <src> with <size>
Try one or more of the following:
•
Load the specified paper into the specified source to clear the message and continue printing.
•
To select the paper tray with the correct paper size or type, press the up or down arrow button until Paper
Changed, Continue
appears, and then press
.
•
Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press
.
•
For more information, press the up or down arrow button until Show me or Tell me more appears, and
then press
.
Load Manual Feeder with <custom type name>
Try one or more of the following:
•
Load the multipurpose feeder with the correct paper type and size.
•
Ignore the request and print on paper that is already being used in one of the trays. Press the up or down arrow
button until Automatically select paper appears, and then press
.
If the printer finds a tray that has paper of the correct type, then it uses the paper from that tray. If the printer
cannot find a tray with the correct paper type, then it prints on the paper that is installed in the default paper
source.
Troubleshooting
159