Make sure the option is installed, Make sure the option is selected, Paper trays – Lexmark 410 User Manual
Page 174: Make sure the paper is loaded correctly, Reset the printer, Make sure the paper tray is installed correctly
C
HECK
TO
SEE
IF
THE
OPTION
IS
CONNECTED
TO
THE
PRINTER
1
Turn the printer off.
2
Unplug the printer.
3
Check the connection between the option and the printer.
M
AKE
SURE
THE
OPTION
IS
INSTALLED
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not
listed, reinstall it.
M
AKE
SURE
THE
OPTION
IS
AVAILABLE
IN
THE
PRINTER
DRIVER
It may be necessary to manually add the option in the printer driver to make it available for print jobs. For more
information, see “Updating available options in the printer driver” on page 35.
M
AKE
SURE
THE
OPTION
IS
SELECTED
From the program you are using, select the option. Mac OS 9 users should make sure the printer is set up in the
Chooser.
Paper trays
These are possible solutions. Try one or more of the following:
M
AKE
SURE
THE
PAPER
IS
LOADED
CORRECTLY
1
Open the paper tray.
2
Check for paper jams or misfeeds.
3
Make sure paper guides are aligned against the edges of the paper.
4
Make sure the paper tray closes properly.
R
ESET
THE
PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
M
AKE
SURE
THE
PAPER
TRAY
IS
INSTALLED
CORRECTLY
If the paper tray is listed on the menu settings page, but paper jams when it enters or exits the tray, then it may not
be properly installed. Reinstall the paper tray. For more information, see the hardware setup documentation that
came with the paper tray, or go to to view the paper tray instruction sheet.
Troubleshooting
174