Reducing printer noise, Adjusting power saver – Lexmark 410 User Manual

Page 49

Advertising
background image

5

Press the up or down arrow button until Eco

Mode appears, and then press .

6

Press the left or right arrow button to scroll through the list of possible settings. Press

at the correct setting.

Submitting Selection

appears.

Reducing printer noise

Use Quiet Mode to reduce printer noise.

Note: See the table for the multiple settings that change when you select a Quiet Mode setting.

Choose

To

On (Text/Graphics)

Note: This setting is best suited for printing text and line
graphics.

Reduce printer noise.

Print jobs will process at one

‑half the normal processing

speed.

Printer engine motors do not start until a job is ready to
print. There will be a short delay before the first page is
printed.

Fans run at reduced speed or are turned off.

If your printer has faxing capability, fax sounds are
reduced or disabled, including those made by the fax
speaker and ringer. The fax is placed in standby mode.

The alarm control and cartridge alarm sounds are turned
off.

The printer will ignore the Advance Start command.

Off (Image/Photo)

Note: Selecting Photo from the driver may disable Quiet
Mode and provide better print quality and full speed
printing.

Use factory default settings. This setting supports the
performance specifications for your printer.

1

Make sure that the printer is on and Ready appears.

2

From the printer control panel, press

.

3

Press the up or down arrow button until Settings appears, and then press

.

4

Press the up or down arrow button until General Settings appears, and then press

.

5

Press the up or down arrow button until Quiet Mode appears, and then press

.

6

Press the left or right arrow button to scroll through the list of possible settings. Press

at the correct setting.

Submitting Selection

appears.

Adjusting Power Saver

Available settings range from 1–240 minutes. The factory default setting is 30 minutes.

To increase or decrease the number of minutes before the printer enters Power Saver mode, do one of the following:

Minimizing your printer's environmental impact

49

Advertising
This manual is related to the following products:

430, 210, 230