Large jobs do not collate, Make sure collate is set to on, Reduce the complexity of the print job – Lexmark 410 User Manual
Page 173: Make sure the printer has enough memory, Solving option problems, Reset the printer, Unexpected page breaks occur
Large jobs do not collate
These are possible solutions. Try one or more of the following:
M
AKE
SURE
C
OLLATE
IS
SET
TO
O
N
From the Finishing menu or Print Properties, set Collate to On.
Note: Setting Collate to Off in the software overrides the setting in the Finishing menu.
R
EDUCE
THE
COMPLEXITY
OF
THE
JOB
Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of
images, and the number of pages in the job.
M
AKE
SURE
THE
PRINTER
HAS
ENOUGH
MEMORY
Add printer memory or an optional hard disk.
Unexpected page breaks occur
Increase the Print Timeout value:
1
From the printer control panel, press
.
2
Press the up or down arrow button until Settings appears, and then press
.
3
Press the up or down arrow button until General Settings appears, and then press
.
4
Press the up or down arrow button until Timeouts appears, and then press
.
5
Press the up or down arrow button until Print Timeout appears, and then press
.
6
Press the up or down arrow button until the value you want appears, and then press
.
Solving option problems
Settings chosen from the software program or application can change or override settings chosen from the printer
control panel. If an option is not functioning, then make sure it is selected in the software as well as the printer control
panel.
Option does not operate correctly or quits after it is installed
These are possible solutions. Try one or more of the following:
R
ESET
THE
PRINTER
Turn the printer off, wait for about 10 seconds, and then turn the printer on.
Troubleshooting
173