Lenco Marine PL 4201 - Manual (Page 14)

14
Change the order of stored channel
1
Select CH ALLOCATION.
Then press .
2
Press or until the position number that
you want to move appears (e.g. CH 40), then press
ENTER.
3
Press or until the program-position on
which you want to put the moving program appears (e.g.
CH 5), then press ENTER.
4
The original program 40 is now stored in memory position 5.
To arrange the other channels, repeat this procedure or...
5
Press MENU repeatedly until the MENU disappears.
Note:
To arrange all channels, begin with
program 1.
Furthermore, continue this procedure to
select the broadcast that should be seen
on program-position 2, 3, 4 and so on.
The Automatic station presetting
stores the found station in a
specific order. This order can be
changed.
C H 4 0
C H A L L O C AT I O N C H 0 1
: SELECT
: RETURN MENU : SET ENTER
C H 4 0
C H A L L O C AT I O N C H 0 5
: SELECT
: RETURN MENU : SET ENTER
C H 0 5
C H A L L O C AT I O N C H 4 0
: SELECT
: RETURN MENU : SET ENTER
: S E L E C T : A D J U S T
: R E T U R N
M E N U
A U T O T U N I N G
M A N U A L T U N I N G
C H A L L O C A T I O N
T E X T L A N G U A G E
W E S T
L A N G U A G E E N G L I S H
3U84011A [E] P11-18 20/12/05, 15:21 14