Lenco Marine PL 4201 - Manual (Page 15)

15
Manual TV station presetting
Example: Preset the ZDF on program position 2.
1
Select MANUAL TUNING. Then press .
2
Press or to select PAL or SECAM-L.
Then press ENTER.
3
Press . The auto search starts forward. It will stop at
each station with good reception. Press again until you
receive the ZDF. Then press ENTER.
4
The channel position number will be highlighted. Press
or repeatedly until the number next to
CH change to 2. Then press ENTER.
The ZDF was now stored in the channel position CH 2.
5
Repeat the steps 2 and 4 to preset other TV stations.
6
Press MENU repeatedly until the MENU disappears.
Notes:
• The auto search stops at the best
receiving position automatically.
A manual fine tuning is normally not
necessary. If want, you can do the
manual fine tuning additionally. In
step 3, when the auto search
stopped at each station, press
or until the desired
fine tuning achieved.
Then press ENTER.
• The search moves up to the next
station position automatically. If
want, you can also hold the search
manually. Press or at the
desired position. The search keeps
hold. If want, do the fine tuning as
the description above.
Usually Automatic station presetting stores all stations of each reception-area. In case of bad
receiving condition, some broadcasts may not be stored. These stations can also be stored
manually.
: R E T U R N M E N U
PA L C H 2
: S E L E C T
: S E T
E N T E R
: R E T U R N M E N U : S E T E N T E R
PA L C H 1
: A D J U S T
M E N U : S E T E N T E R
PA L C H 1
: F. T U N E
: R E T U R N
: S E A R C H
: S E L E C T : A D J U S T
: R E T U R N
M E N U
A U T O T U N I N G
M A N U A L T U N I N G
C H A L L O C A T I O N
T E X T L A N G U A G E
W E S T
L A N G U A G E E N G L I S H
3U84011A [E] P11-18 20/12/05, 15:21 15