Lenco Marine PL 4201 - Manual (Page 17)

17
Basic Operation
Note:
If the built-in tuner does not receive
anything (e.g. if no antenna is
connected) during TV-operation, then
the TV-unit will change to standby after
approx. 15 minutes.
Press or to change to the program
forward or backward. The changing takes approx. 2
seconds. If the auto search stored only 5 stations,
these only 5 also will appear. Still uncovered or
hidden store position (see P.34) will not appear.
Channel selection
With the 10 number buttons.
Example:
• No. 2: Press 0 and within 2 seconds, press 2.
The station stored in the 2nd store position will
appear.
• No. 29: Press 2 and within 2 seconds, press 9.
The station stored in the 29th store position will
appear.
QuickView
button allows you to go back to the last selected
channel.
Volume adjusting
Press or to adjust the volume. The volume level
disappears after 4 seconds.
MUTE
Press . The sound will be cut off. MUTE will appear for
approx. 4 seconds.
The muting can be released by pressing again or or .
DISPLAY
Press DISPLAY.
Channel number
and wide screen
type will appear.
The display will
disappear after 4
seconds.
STATUS
Press STATUS. The clock and a program information will appear
approx. 2 seconds later, if the station supported.
SLEEP TIMER
Press
. SLEEP
and the minutes
until the shut-off
will appear. Each
time you press
the number near
SLEEP will
change.
When the
displayed time
runs out, the unit will switch to standby. The display will
disappear after approx. 4 seconds.
To cancel the sleep time:
Press
repeatedly until “0” appears.
S T E R E O
C H 1
A U T O
S L E E P
1 2 0
3U84011A [E] P11-18 20/12/05, 15:21 17